How to dry wet sawdust quickly? A large amount of wet sawdust can be processed using Dingli sawdust dryer equipment. This treatment method is one of the better drying methods for wet sawdust. After drying a large amount of sawdust, it can be made into biomass pellet fuel by molding equipment and reused .
The processing route of Dingli sawdust drying and forming production line adopts the mixing process of primary drying, secondary crushing, continuous feeding and regulated feeding. The forming rate of pellet forming fuel reaches above 98%, and the bulk density, pellet density and calorific value are high. . It can achieve large-scale, continuous and stable production to meet the needs of the industrialization of biomass pellet fuel. The equipment uses high-temperature hot air drying. The wet sawdust is fed into the drum by the conveyor to achieve co-current drying. The sawdust is continuously under the inner copy board The pick-up and scattering advance in a spiral manner, and pass through the inner, middle and outer layers to realize the heat exchange between sawdust and hot air and quickly dry the sawdust.
The better drying method of wet sawdust can be processed by Dingli dryer. Currently Zhengzhou Dingli has launched a variety of models of sawdust dryer equipment, which has a large processing capacity and good material drying effect, which can meet the needs of drying wet sawdust in different regions. , Welcome to leave a message for details.
Large Drying Plant & Free Customization