The waste yeast liquid dryer is different from the previous drum dryer. The equipment adopts a single-cylinder structure and adopts indirect heat conduction for drying. The drying of the cylinder can complete the drying of the material in one rotation, which is necessary for the treatment of yeast materials.

  The waste yeast liquid dryer is composed of a drying cylinder, a frame, a transmission system, a dipping device, a material limitation, a scraping device, a dipping device, a steam exhaust hood of the steam system, etc. The slurry is preheated in the preheating tank, preheated to about 50 ℃, using the feed pump to enter the dipping tank in the lower part of the drying cylinder, the drying cylinder is immersed about 60-80mm, the outer surface of the rotating drying cylinder is coated with an uniform layer of slurry, the steam pressure of 0.15-0.3Mpa is fed into the dryer, the slurry is heated on the outer wall of the dryer, and the moisture is vaporized and discharged by the axial fan. After the drying cylinder rotates for one cycle, the materials are dried, and the sheet material is discharged by the scraper on the outer wall of the drying cylinder, and it falls to the discharge port to complete the collection. The main machine of the machine is composed of drying cylinder, frame, transmission system, scraper device, material limiting, scraping device, dip device and steam system. In addition, it is equipped with electrical control cabinet and exhaust hood.

  The waste yeast liquid dryer designed by Zhengzhou Dingli is widely used by major wineries. This equipment has the advantages of energy saving, environmental protection, simple operation and so on. If you need waste yeast liquid dryer, welcome to come to our factory to purchase!