The bean dregs dryer can dry the bean dregs with 90% moisture content to the finished product at one time. Aiming at the characteristics of easy-to-solidify during the drying process of bean dregs, the structure structure of the general single-channel dryer was changed, and the combined self-cleaning device was adopted, which greatly expanded the application range of the single-channel dryer, not only for drying Various sludges can also be used to dry various high viscosity materials.

  The whole process of bean dregs drying machine:

  1. After the dehydrated wet bean dregs enters the dryer, it is evenly dispersed in the dryer and fully in contact with the hot air under the turning of the uniformly distributed plate in the drum, which accelerates the drying heat and mass transfer. With the continuous rotation of the cylinder, part of the water is evaporated, and the bean dregs are further dried. At the same time, the cleaning device also plays a role in shredding the bean dregs pellets, increasing the drying speed, and finally the dried bean dregs become a low-moisture loose material and are discharged from the discharge port.

  2. During the drying process, the bean dregs is discharged to the star-shaped discharge valve of the other section of the dryer under the action of the inclined plate and the heat medium to discharge the dried product. The selection and design of the process parameters of the bean dregs dryer production line and the technical parameters and structure of each equipment were obtained after careful analysis and study of the bean dregs materials, and were verified by the actual bean dregs drying test.

  3. In the design of the plan, fully taking into account the characteristics of large moisture content, high protein content, and high viscosity of soybean dregs, and adopted a series of unique and unique technologies and processes to solve it to ensure a good drying effect.

  If you have any questions about bean dregs drying machine, please feel free to contact us!