As its name implies, sand dryer machine is a machine being used to dry sand. The following content mainly discusses about some key parts of sand dryer machine and some matters needing to be noticed. Cyclone separator is good at collecting pollutants and protecting environment. Pollutants pass through the channel and enter into the cyclone separator. After passing through the channels, the dust and foreign matters enter into the cyclone separator.

Linear vibrating screen plays the role in screening dried materials. Users of rotary sand dryer can get desired products with the help of linear vibrating screen. Elevator can elevate sand material. At the discharging place, there are package bags. The finished sand can directly be put into package bags without the cost of manpower. Exhaust fun can take the heat produced in air heating furnace into the inner part of sand rotary dryer. Inside the machine, heat exchange happens when materials contacts with heat.

During the working process of sand dryer machine, the rack of riding wheel should be filled with cooling water. What’ more, parts needing for lubrication should be lubricated timely. When production is over, users should extinct the fire in the air heating furnace first. The rotary sand dryer can not be turned off until the temperature inside closes to the temperature outside. Or else, the drum of sand dryer machine would get bent or deformed.

If outage occurs, the first thing is to extinct the fire in air heating furnace and then stop feeding. Users should turn the drum for every 15 minutes until the drum is cooled. Or else, the drum would be deformed. Want more information? Please leave messages on our website: http://www.ft-dryer.com.