Corn starch residue can be reused as feed material. What is the process of corn starch residue drying? Corn starch residue dryer manufacturer - Zhengzhou Dingli to introduce the production process of corn starch residue dryer.

  Technological process of corn starch residue dryer: Corn starch residue with water content of 80-85% goes through special dehydrator first, and the water is removed to about 68%. Then it is sent to the stirring drum dryer by screw conveyor to realize downstream drying. The material and the hot gas are fully heat exchanged, and the water is quickly evaporated and vaporized to about 35%. The drum drying process is completed, and the screw conveyor discharges it into a special pulverizer for the semi-wet corn starch residue. The particle size of the pulverized material is less than 1 mm, and the pulse airflow is dried. In the dry process, the material quickly drops below 12%. The dry powder is recovered by the cyclone unloader and the pulse bag type dust collector, and the exhaust gas reaches the standard discharge, completing the whole drying process. A shock cleaning device is installed inside the drum to prevent the material from adhering to the cylinder wall.
  Corn starch residue can be dried by the above process to make the corresponding finished product for use. Zhengzhou Dingli is a corn starch residue dryer manufacturer, providing a variety of drying equipment of specifications and models, welcome to visit our company.