The working principle of the heat conduction tube bean dregs dryer is to use the heat conduction tube to transfer heat energy to the bean dregs, so that the water in the bean dregs evaporates, so as to achieve the purpose of drying. The specific workflow is as follows:

1. Loading bean dregs: put the bean dregs to be dried into the dryer.

2. Heating the heat pipe: heat the heat pipe through a heat source to increase its surface temperature.

3. Heat energy transfer: The heat energy is transferred to the bean dregs through the heat conduction tube to evaporate the water in the bean dregs. The heat pipe transfers heat energy from the heat source to the inside of the dryer, and then conducts heat transfer with the bean dregs through the surface of the heat pipe.

4. Control temperature and time: During the drying process, adjust the temperature and time of the dryer as needed to achieve the best drying effect.

5. Complete the drying: After the drying is completed, take out the bean dregs in the dryer to achieve the expected drying degree.

In short, the heat-conducting tube bean dregs dryer transfers heat energy to the bean dregs through the heat-conducting tube, so that the water in the bean dregs evaporates, so as to achieve the purpose of drying. Compared with the traditional heating method, the heating method of the heat pipe has the advantages of high heat transfer efficiency, uniform temperature, and low energy consumption.