The cow dung dryer has high drying intensity. Because the material is highly dispersed in the airflow, the drying time is short, the thermal efficiency is high, and the drying is relatively thorough. When drying unbound water, the thermal efficiency can reach 60%. The dryer achieves "zero horizontal thrust", which greatly reduces the wear of the retaining roller, and the cylinder runs smoothly and reliably; This greatly reduces wear and power loss.

How to repair the worn parts of the cow dung dryer during production and use? Before working, we inspect all moving parts, bearings, conveyor belts and V-belts for damage and repair or replace any unsuitable parts. Lubricating oil should be added every 100 hours of operation and 400 hours of operation. Every 1000 hours of operation, the motor is maintained and replaced with butter. Lubricating oil is added to the bearings of the hoist and conveyor at each gear change.

We all know the maintenance of the vulnerable parts of the dryer: bearings, bearing seats, lifting buckets, and lifting bucket screws are easy to loosen and require frequent maintenance. Conveyor bearings and belt connection buckles should be checked and replaced frequently. Electrical appliances and moving parts should be serviced frequently. Be careful during tower top maintenance.

Dryers should be maintained every working season. The dryer should clear the sundries in the air duct, the gourd should loosen the tension wire, the fan should clear the adhesion of the fan blades, the hot blast stove should clear the ashes in the sedimentation tank, and clean the pipes one by one. The speed control motor speedometer returns to zero and is in standby.