There are many reasons for the clogging of the tumble dryer, but in order to correctly understand the product, we must learn to master the methods and skills in time. After all, this is the only way to help us grasp the effect of the product. Then we will simply understand How should I deal with such problems.

    1. The viscosity of the material is too large

    If the viscosity of the material to be dried is too large, the material will easily adhere to the inner wall of the drum after entering the inside of the dryer. If the cleaning device in the drum cannot remove the adhesive in time, the longer the time, the longer the time. The more products, the more barrier materials are formed. Therefore, for high-viscosity materials, we need to clean internally to facilitate the timely removal of adhering materials.

    2. The moisture content of the material is too high

    When the moisture content of the material is too high, it is easy to cause agglomeration and agglomeration during the drying process, which will affect the feeding efficiency and even cause the dryer to block the material. In this case, we need to strictly control the water supply to prevent clogging.

    3. Insufficient heat in the dryer

    The dehydration treatment of materials is mainly carried out under the effect of heat transfer. If the heat in the drum is insufficient, the moisture in the high-humidity material cannot be quickly removed, thereby prolonging the retention time of the material in the drum
between. Therefore it is easy to block the material. Therefore, ensuring sufficient heat and stable temperature is one of the key factors to prevent clogging materials.

    When the dryer is dealing with the clogging problem, it is necessary to grasp the specific reasons, and then make timely processing according to the actual situation, so I hope everyone will pay special attention in the future use.