INTRODUCTION

If you are always troubled with agricultural wastes like wood chips, corn straw, soybean straw, cotton straw, wheat straw, sorghum straw, wood flour, wood shavings and sawdust, Dingli wood shavings dryer must be good helper. The rational distribution of base plate should be ascertained. The base plate should close the foundation bolts and be placed on the CG position of load for the fear of uneven stressing. The plate number of each group should be no more than 5. Relatively thick plates are suitable to be placed on the upper and lower. While for thin plates, they are better to be placed in the middle. The lowest one should has sufficient contacting accuracy with the foundation without any empty triangle and shaking circumstance.

The coordinate position, lateral level and longitudinal slope of wheel base should meet the requirements. The longitudinal center line of posterior and anterior bases should be in the same line with allowable error for about 0.5mm. All the above adjustments can finish with the help of the adjustable bolts on the bases. The rotary drum of wood chip dryer should be steadily placed on the wheel base. If the drum is a little longer or heavier, the integral hoisting is relatively difficult.

Segmental hoisting can be done in order according to the actual situation. However, detailed hoisting methods should be formulated and the required tools should be prepared in advance. If you need our products, please click the website and leave messages on it: http://www.ft-dryer.com. Professional personnel in our company will contact with you as soon as possible. Dingli sincerely welcomes you to come for site visit and inspection.