INTRODUCTION

The installation work of wood chip dryer is of great importance for the follow-up work. The following content mainly discusses about some key points that are necessary to notice about. With regard to the foundation acceptance, it includes the following points. The outlook of wood shavings dryer should be clean without oil dirt and dust, intact without bare steel, cracks and unfilled corner, perfect without other casting defects. With regard to the basic sizes and positional deviation, they should meet the following demands. The axis error in vertical and horizontal direction should be smaller than 20mm. The elevation error on different levels should be smaller than 20mm. The nonflatness on upper flate should be smaller than 5mm.

For equipment acceptance, users should check out the parts, accessories, standard component and random file according to the packing list, which is offered by the manufacturer of wood chip dryer. If there are mistakes or damages, users should make records immediately and ask manufacturers to change. When removing the outer packages of wood shavings dryer, users should notice whether some parts are damaged or deformed during the processes of transportation and handling.

In order to avoid the re-doing of installation and ensure the schedule and quality of installation, users should pre-check and pre-assemble the key parts and accessories. As a professional manufacturer of wood shavings dryer, Dingli works very hard to practice the service tenet of being responsible for every procedure, every product and every customer. If you want to work with us, please click the website and leave messages on it: http://www.ft-dryer.com. We will contact with you as soon as possible.