INTRODUCTION

As a professional manufacturer of drying machines like rotary sand dryer, industrial dryer and wood chip dryer, etc, Dingli has made the production for more than 30 years. According to the national construction specification of machinery engineering, the distance between double coupling should vary from 5mm to 8mm. The installation of air inlet and outlet, feeding mouth and discharging mouth as well as the foundation bolts for sand dryer machine should be carried out orderly. In order to make the distance between sealing place and rotary drum at the discharging end as even as possible, the flange distance should be well sealed with asbestos cord during the installation process for discharging device.

When the rotary drum is revolving, the error for surrounded distance should be smaller than 8mm or 10mm. During the installation process for feeding device, in order to avoid the collision, the distance between mazes should be adjusted properly. When installing the air let and outlet for rotary sand dryer, factors like adjustment amount of stopping wheel and thermal expansion amount should be taken into considerations.

Morality rooted, people will be honest; quality oriented, product will be excellent. With the marketing principle that occupying market by products, creating market by service and leading market by popularity, Dingli has been making a lot of efforts to practice this marketing principle. If you need our products, please click the website and leave messages on it: http://www.ft-dryer.com. Professional technicians and engineers will contact with you as soon as possible. If you have any question about our products, leaving your advice on our website is also OK. We will take them sincerely. Thank you! Sincerely welcome you to come for site visit and inspection.