INTRODUCTION

As its name implies, the sand dryer machine is mainly used to dry sand materials like river sand, artificial sand, silica sand, yellow sand and mineral sand. In order to improve the drying efficiency of rotary sand dryer and lower the working strength of labors, motor tightening device is applied. With regard to the driving modes, there are several types like pneumatic, hydraulic, compound, electromagnet and vacuum adsorption, etc. The controlling system of rotary sand dryer with low failure rate is easy to operate. The controlling system, with multiple operation mode and perfect management function, can play several roles of primary current, second short circuit, secondary open circuit, bias excitation and so on.

Lubrication and maintenance are of necessary importance for sand dryer machine. If the lubricating work is of failure, consequences from parts wear to serious accidents would occur. If oil leakage occurs in rotary sand dryer, you’d better to find out the reasons immediately and deal it with effective measures. It is not allowed for leaked oil to erode the foundation. When failures occur, what you need to do is to calm down first, then carefully check the failures according to the instruction books given by manufacturers. If the failures can not be resolved with the efforts you’ve payed, you can ask manufacturers to help you.

As a professional manufacturer of sand rotary dryer, Dingli works very hard to practice the service tenet of being responsible for every procedure, every product and every customer. If you need our products, please click the website and leave messages on it: http://www.ft-dryer.com. Thanks for your support.