Good sawdust dryer equipment in principle is fully capable of drying materials to achieve a more ideal drying effect. However, some customers use sawdust and other high moisture material, in the normal drying of the case will appear incomplete drying imagination. What measures can be taken to achieve the ideal drying effect?

  The sawdust dryer can only be dried when it reaches a certain temperature, during which the equipment is in a no-operation state, which wastes a lot of energy. And in this period of time after the resumption of ignition after shutdown, the dryer exhaust gas dust content is very high, the dust removal equipment pressure is very large. In order to achieve a good drying effect, then we must shorten the rotary dryer to turn on the production time, in order to achieve this purpose must maintain the temperature of the dryer barrel.

  The sawdust dryer equipment increases the height of the fender inside the hot air furnace, which allows full combustion of energy to maintain the temperature of the dryer. Load the furnace bar in the combustion room, continue to spray coal before the spraying machine stops working, to ensure the combustion of coal in the combustion room, then after the shutdown can still ensure the temperature of the wood chips dryer. When the sawdust drum dryer is working, if the temperature does not reach the expected temperature, it will affect the drying quality and drying efficiency of materials, therefore operators must pay attention to the cylinder temperature.