Okara is a kind of material that combines water and oiliness, and the water is not easy to dispose of. Our company has developed a complete set of equipment for dehydration and drying of okara based on this feature. Firstly, the bean dregs are dewatered by a dehydrator to remove most of the free water; then, the wet bean dregs with 55-60% water content enters into the bean dregs dryer and are quickly dried in a special drying system with a dispersing device. During the entire drying process, the heat energy is fully utilized, and the bean dregs are evenly heated, so the dried bean dregs have good color, no paste, and low energy consumption.

  In the design of the plan, the characteristics of large moisture content, high protein content, and high viscosity of bean dregs were fully considered, and a series of original technologies and processes were adopted to solve it to ensure good drying results.

  1. Simple and direct high-temperature heat transfer method can save more than 60% of energy and greatly reduce costs.

  2. The drying method that breaks up while drying makes the quality of the dried bean dregs greatly improved, so that the dried bean dregs are not burnt and mushy, and the nutrition loss is small.

  3. The use of new exhaust gas and self-drying and heat preservation system can increase the energy saving effect by more than 20%.

  Zhengzhou Dingli is a professional manufacturer of bean dregs drying equipment, our products have been exported to many contries. If you want to know more about our products, please feel free to contact us!